Capacity:
- Weight: 2500 pounds
- Offset of C.G. from table: 6 inches
- Eccentricity of C.G. from axis: 6 inches
Rotation:
- Motor: Variable speed DC, 3/4 horsepower
- Speed range: 0.1 to 2.0 rpm
- Speed accuracy: 2% of set speed
Tilt:
- Motor: AC brakemotor, 3/4 horsepower
- Range: 135 degrees forward tilt
- Inherent Overhang: 5.56 inches
Elevation:
- Adjustment: Manual
- Range: 27-7/8" to 39-7/8" in 4" increments
Table:
- Diameter: 30 inch square, with four radial T-slots
- Mounting bolt size: 1/2 inch
- Bearings: Timken tapered roller bearings
- Ground: 600 amp spring-loaded mechanical ground
Controls
- Pendant: Remote pendant 115V, with 30' cable
- Rotation speed: One-turn potentiometer
- Rotation mode: Two-position selector switch, WELD/RAPID
- Rotation direction: Three-position selector switch, FWD/OFF/REV
- Rotation control: START and STOP pushbuttons
- Tilt control: Three-position momentary switch, UP/OFF/DOWN
- Power: 115V, 20A, single phase, 60 hertz.
- Overload protection: Circuit Breaker
- Foot switch: Optional
Weight
- Shipping weight: 1600 pounds
|
CLICK HERE
To download the specifications
and drawing in PDF format.
|
